NEO-6M GPS Module V2 with Ceramic Antenna | Flight Controller & Tracker
₵85.00
Add Satellite Navigation to your project. This high-precision GPS module allows your Arduino, ESP32, or Drone to know its exact location, speed, and time. It comes with a detachable ceramic antenna and a built-in backup battery for fast “Hot Starts.”
-
Chipset: U-Blox NEO-6M.
-
Antenna: High-gain Active Ceramic Antenna (Included).
-
Data Retention: EEPROM + Battery (Saves configuration).
-
Best For: Drone Flight Controllers, Vehicle Trackers, and Speedometers.
2 in stock
The NEO-6M V2 GPS Module with EEPROM is a high-performance GPS receiver designed for precise location tracking, navigation, and real-time positioning. Equipped with an EEPROM for data retention, this module delivers fast satellite acquisition and stable performance, making it perfect for Arduino, Raspberry Pi, ESP32, drones, and IoT applications.
🔹 Built-in EEPROM & External Antenna for Reliable GPS Reception ⚡
✔ GPS Chipset: u-blox NEO-6M (High-sensitivity GNSS receiver).
✔ Operating Voltage: 3.3V – 5V (Compatible with Arduino & Raspberry Pi).
✔ Built-in EEPROM: Stores configuration data for quick boot-up.
✔ Baud Rate: Default 9600bps (adjustable).
✔ Antenna Type: External ceramic active antenna (for improved signal strength).
✔ Backup Battery (RTC): Keeps GPS settings for faster startup.
✔ Interface: UART (TX/RX, supports NMEA protocol output).
🔹 Applications – Where to Use the NEO-6M GPS Module 🛠️
✔ GPS Navigation & Tracking – Use in vehicles, boats, and drones for real-time location.
✔ IoT & Smart Devices – Integrate GPS with IoT projects for geofencing & asset tracking.
✔ Outdoor Robotics & Automation – Enable GPS-based autonomous navigation.
✔ Weather Stations & Environmental Monitoring – Collect geo-referenced data.
✔ Personal & Wildlife Tracking – Build GPS loggers for research & security.
🔹 How to Use & External Resources 📚
The NEO-6M V2 GPS Module connects easily via UART (TX/RX) to Arduino, Raspberry Pi, and ESP32. It outputs NMEA sentences containing latitude, longitude, altitude, speed, and time data.
📖 NEO-6M v2 GPS module with EEPROM Resources:
✔ Arduino GPS Integration With NEO-6M
✔ Raspberry Pi GPS Tracking with NEO-6M Setup
✔ YouTube Tutorials – NEO-6M GPS Module with Arduino
🔹 Best Price & Availability in Ghana 🇬🇭
Looking for a NEO-6M V2 GPS Module with EEPROM in Ghana? Whether for navigation, asset tracking, or IoT geolocation, this high-precision GPS module is an essential tool. Order today for fast delivery across Ghana!
Related products
16×2 LCD Display with I2C Interface – Blue Backlight
Display your project data with only four connections. This 16×2 LCD comes with the I2C backpack already soldered, making it ready to use without additional soldering.
Display: 16 characters × 2 lines
Backlight: Blue with white characters
Interface: I2C (VCC, GND, SDA, SCL)
Operating Voltage: 5V DC
Contrast: Adjustable onboard potentiometer
Beginner Friendly: I2C adapter already soldered
Best For: Arduino, ESP32, Raspberry Pi, IoT and STEM projects
A 16×2 character LCD provides two rows of 16 characters, while using an I2C interface greatly reduces the number of microcontroller connections required compared with the standard parallel interface.
DHT11 Temperature and Humidity Sensor Module | Digital Weather Station
The #1 sensor for weather projects. The DHT11 is the most affordable way to measure ambient temperature and humidity. It provides calibrated digital signal output, making it perfect for automatic fan controllers and weather stations.
-
Measures: Temperature (0-50°C) & Humidity (20-90%)
-
Interface: Single Wire Digital (Easy Arduino Connection)
-
Includes: 3-Pin Breakout Board + Jumper Wires (Check your stock to confirm wires!)
-
Ideal For: Smart homes, greenhouses, and environment monitoring.
DS18B20 Waterproof Temperature Sensor Probe | Stainless Steel Digital Thermometer
Measure liquid temperature with digital precision. This is the waterproof version of the famous DS18B20 sensor. Encased in a stainless steel tube, it is perfect for measuring water, soil, or air temperature in harsh environments.
-
Range: -55°C to +125°C
-
Interface: 1-Wire Digital (Requires only 1 pin)
-
Cable Length: 1 Meter
-
Best For: Aquariums, boilers, soil temperature, and cold chain monitoring.
Flame Sensor Module (YG1006) | Infrared Fire Detector for Arduino
Give your robot the ability to see fire. This sensor detects the specific infrared light wavelengths (760nm - 1100nm) emitted by flames. It is the essential "eye" for Fire Fighting Robots and home fire alarm projects.
-
Sensor Type: YG1006 NPN Phototransistor (High Speed).
-
Detection Range: Up to 1 meter (depending on flame size).
-
Spectrum: 760nm - 1100nm (Invisible IR light).
-
Best For: Fire Fighting Robots, Smart Kitchen Alarms, and Safety Systems.
IR Infrared Obstacle Avoidance Sensor Module | FC-51 for Arduino
Teach your robot to see. This sensor emits infrared light and detects reflections to see if an object is in front of it. It is the essential component for building "Obstacle Avoiding Robots" and simple security alarms.
-
Detection Range: 2cm - 30cm (Adjustable).
-
Output: Digital Signal (LOW when obstacle detected).
-
Compatibility: Works directly with Arduino, ESP32, and Raspberry Pi.
-
Best For: Robot Cars, Smart Trash Cans, and Proximity Alarms.
MQ-135 Air Quality & Hazardous Gas Sensor Module | CO2, Smoke, Ammonia
Detect smoke and dangerous gases instantly. The MQ-135 is the most versatile gas sensor for air quality monitoring. It detects a wide range of gases including Ammonia, Sulfide, Benzene, Smoke, and CO2. Perfect for "Smart Home" safety systems and environmental monitoring.
- Gases Detected: NH3, NOx, Alcohol, Benzene, Smoke, CO2.
-
Output: Analog (Gas Concentration) and Digital (Alarm Trigger).
-
Warm-up Time: ~20 seconds.
-
Best For: Air Quality Monitors, Smoke Alarms, and Industrial Safety.
MQ-3 Alcohol Sensor Module | Breathalyzer & Ethanol Detector
Build your own Breathalyzer. The MQ-3 is specifically designed to detect alcohol (Ethanol) vapors. It has high sensitivity and fast response time, making it the perfect sensor for "Smart Car" safety systems that prevent drunk driving.
-
Detects: Alcohol, Ethanol, Benzine.
-
Sensitivity: Adjustable via Blue Potentiometer.
-
Warm-up: Heater requires ~20 seconds.
-
Best For: Breathalyzers, Drunk Driving Alarms, and Industrial Monitoring.
SW-420 Vibration Sensor Module | Adjustable Impact & Shake Switch
Detect motion, impacts, and theft. The SW-420 is a "Normally Closed" vibration sensor that triggers whenever it feels a shake. It features an onboard potentiometer to adjust sensitivity, making it perfect for sensitive projects like door alarms or earthquake detectors.
- Sensor Type: SW-420 (Normally Closed).
- Output: Digital (High/Low).
- Sensitivity: Adjustable via Blue Potentiometer.
- Best For: Anti-Theft Alarms, Smart Cars, and Impact Detection.
Reviews
There are no reviews yet.