Soil Moisture Sensor Module (YL-69) | Automatic Plant Watering System
Original price was: ₵15.00.₵14.00Current price is: ₵14.00.
Never forget to water your plants again. The Soil Moisture sensor measures the water content in soil. When the soil gets dry, the sensor output changes, allowing your Arduino to turn on a water pump automatically.
-
Outputs: Analog (Exact moisture level) & Digital (Threshold switch)
-
Adjustable: Set your “Dry” trigger point with the blue potentiometer.
-
Ideal For: Smart irrigation systems, greenhouse monitoring, and science projects.
5 in stock
The Soil Moisture Sensor Module is designed to measure soil humidity levels in gardens, farms, and potted plants. With both analog and digital outputs, this module is ideal for automated irrigation systems, smart gardening, and environmental monitoring. Compatible with Arduino, Raspberry Pi, ESP8266, and IoT devices, it helps prevent overwatering or underwatering of plants.
🔹 Dual Output for Precise Moisture Level Monitoring ⚡
✔ Analog Output (AO): Provides real-time soil moisture percentage for detailed monitoring.
✔ Digital Output (DO): Pre-set threshold triggers HIGH/LOW signal for automation.
✔ Adjustable Sensitivity: Built-in potentiometer for fine-tuning moisture levels.
✔ Operating Voltage: 3.3V – 5V (Compatible with Arduino, ESP32, and Raspberry Pi).
✔ Power Efficiency: Low power consumption for battery-powered IoT applications.
✔ Corrosion-Resistant Probes: Ensures long-term durability in soil environments.
🔹 Applications – Where to Use the Soil Moisture Sensor 🛠️
✔ Automated Irrigation Systems – Trigger water pumps based on soil dryness.
✔ Smart Gardens & Greenhouses – Monitor soil health for optimal plant growth.
✔ IoT & Home Automation – Integrate with smart controllers for remote monitoring.
✔ Agriculture & Hydroponics – Enhance crop management with real-time data.
✔ STEM & DIY Electronics – Perfect for students and makers learning sensor technology.
🔹 How to Use & External Resources 📚
The Soil Moisture Sensor Module connects easily to Arduino, Raspberry Pi, and microcontrollers. Simply insert the probes into the soil, connect VCC, GND, AO, and DO, and start monitoring moisture levels using simple code and libraries.
📖 Helpful Resources for Soil Moisture Sensor Module:
✔ Arduino Soil Moisture Sensor Guide
✔ Raspberry Pi Smart Irrigation System
✔ YouTube Tutorials – Soil Moisture Sensor with Arduino
🔹 Best Price & Availability in Ghana 🇬🇭
Looking for a Soil Moisture Sensor Module (Analog & Digital Outputs) in Ghana? Whether for home gardening, agricultural automation, or smart irrigation, this precise and reliable sensor is an essential tool for plant care. Order today for fast delivery across Ghana!
Related products
1-Channel 5V Relay Module | Low Level Trigger for Arduino
Control high voltage safely. This single-channel relay allows your Arduino to switch high-power devices like light bulbs, water pumps, or fans. It isolates your microcontroller from the high voltage using an internal switch.
-
Trigger: Low Level (Connect Signal to GND to turn ON).
-
Max Load: 250V AC / 10A.
-
Indicators: Red Power LED + Green Status LED.
-
Best For: Smart Lamps, Fan Control, and Simple Automation.
16×2 LCD Display with I2C Interface – Yellow Backlight
A clear, beginner-friendly 16×2 character display with the I2C backpack already soldered. The yellow-green backlight provides excellent readability while the I2C interface reduces wiring to only four connections.
Display: 16 characters × 2 lines
Backlight: Yellow-Green
Interface: I2C (VCC, GND, SDA, SCL)
Voltage: 5V DC
Contrast: Adjustable
Installation: Ready to use – no backpack soldering required
Best For: Arduino, ESP32, Raspberry Pi, IoT and educational projects
4×4 Matrix Membrane Keypad | 16 Button Keypad Module
The standard keypad for security projects. This ultra-thin 16-button keypad allows users to enter passwords, navigate menus, or control robots. It features a peel-and-stick adhesive backing, making it easy to mount on any plastic project box or door.
-
Keys: 16 (0-9, A-D, *, #)
-
Mounting: Self-Adhesive Backing (Peel & Stick)
-
Interface: 8 Pins (Standard 2.54mm header)
-
Best For: Electronic Door Locks, Calculators, and Attendance Systems.
DS3231 RTC Real-Time Clock Module
The DS3231 is a highly accurate I2C real-time clock (RTC) with an integrated temperature-compensated crystal oscillator (TCXO).
-
Chip: Maxim DS3231 (High Precision)
-
Memory: Built-in AT24C32 32K I2C EEPROM
-
Voltage: 3.3V – 5.5V DC
-
Interface: I2C (SCL, SDA)
-
Battery Backup: Holds time when power is off (Coin cell slot included)
-
Accuracy: Much higher than the standard DS1307
HC-SR501 PIR Motion Sensor Module | Infrared Detector for Arduino
Build your own burglar alarm or automatic light. The HC-SR501 detects human and animal movement by sensing body heat. It is the standard motion sensor for Arduino security projects.
-
Range: Adjustable (3 to 7 meters)
-
Output: 3.3V Logic (High when motion detected)
-
Features: Adjustable Time Delay & Sensitivity
-
Ideal For: Automated lighting, security systems, and robotics.
High Sensitivity Vibration Sensor Module (SW-1801P) | Shock & Shake Switch
Detect even the slightest tap. Unlike standard vibration sensors that require a hard shake, the SW-1801P High Sensitivity module can detect light knocks, impacts, and vibrations. Perfect for anti-theft alarms and "Smart Wake-Up" devices.
-
Sensor Type: SW-1801P (High Sensitivity Spring).
-
Output: Digital (High/Low).
-
Adjustable: Blue Potentiometer to set sensitivity trigger.
-
Best For: Anti-Theft Alarms, Earthquake Detection, and Smart Toys.
IRF520 MOSFET Driver Module (0-24V) | PWM Motor & LED Controller
The easiest way to drive 12V/24V loads. This breakout board allows your Arduino to control high-voltage devices like LED strips, DC motors, and solenoid valves using the IRF520 MOSFET. It features screw terminals for easy wiring—no soldering required!
-
Max Load: 24V DC / < 5A.
-
Control Voltage: 3.3V or 5V (PWM Compatible).
-
Output: Pulse Width Modulation (Speed/Dimming control).
-
Best For: LED Strips, Small DC Fans, and Solenoids.
SW-420 Vibration Sensor Module | Adjustable Impact & Shake Switch
Detect motion, impacts, and theft. The SW-420 is a "Normally Closed" vibration sensor that triggers whenever it feels a shake. It features an onboard potentiometer to adjust sensitivity, making it perfect for sensitive projects like door alarms or earthquake detectors.
- Sensor Type: SW-420 (Normally Closed).
- Output: Digital (High/Low).
- Sensitivity: Adjustable via Blue Potentiometer.
- Best For: Anti-Theft Alarms, Smart Cars, and Impact Detection.
Reviews
There are no reviews yet.