SIM800L GSM GPRS Module
₵85.00
The SIM800L GSM GPRS Module enables SMS, voice calls, and mobile data communication for Arduino, Raspberry Pi, and IoT projects. Featuring quad-band GSM support, low power consumption, and UART communication, it’s perfect for remote monitoring, GPS tracking, and automation.
Out of stock
This product is currently sold out.
No worries! Enter your email, and we'll let you know as soon as it's back in stock.
The SIM800L GSM GPRS Module is a compact, low-cost wireless module that enables voice calls, SMS messaging, and mobile internet connectivity in Arduino, Raspberry Pi, ESP32, and IoT projects. Supporting quad-band frequencies (850/900/1800/1900MHz), this module provides global network coverage, making it ideal for remote monitoring, GPS tracking, smart home automation, and security systems.
🔹 Compact, Low-Power GSM Module with Full Network Support ⚡
✔ Operating Voltage: 3.7V – 4.2V (Ideal for Li-ion batteries or voltage regulators).
✔ Network Support: GSM/GPRS (2G) – Supports 850/900/1800/1900MHz bands.
✔ Data Transmission: Supports TCP/IP, HTTP, and FTP protocols.
✔ SIM Card Compatibility: Micro SIM slot for mobile network access.
✔ Antenna Options: External PCB or spring antenna for better signal reception.
✔ Communication Interface: UART (TX/RX) – Works with Arduino, ESP8266, STM32, and Raspberry Pi.
✔ Low Power Consumption: Ideal for battery-powered IoT applications.
🔹 Applications – Where to Use the SIM800L Module 🛠️
✔ IoT & Smart Home Automation – Control devices remotely via SMS or mobile data.
✔ GPS Tracking & Asset Monitoring – Integrate with GPS modules for real-time location tracking.
✔ Security & Alarm Systems – Send alerts via SMS in case of intrusion or motion detection.
✔ Wireless Sensor Networks – Transmit sensor data over GPRS for remote monitoring.
✔ Remote Control & Telemetry – Control relays, smart devices, and industrial equipment wirelessly.
🔹 How to Use & External Resources 📚
The SIM800L GSM GPRS Module connects via UART (TX/RX) to Arduino, ESP32, STM32, and Raspberry Pi. Use AT commands to send SMS, make calls, or access mobile data. Ensure a regulated power supply (4.2V) for stable operation.
📖 Helpful Resources for SIM800L GSM Module:
✔ SIM800L Datasheet & Pinout
✔ Arduino SIM800L GSM Communication Guide
✔ Raspberry Pi SIM800L GSM Module Setup
✔ YouTube Tutorials – SIM800L with Arduino
🔹 Best Price & Availability in Ghana 🇬🇭
Are you looking for a SIM800L GSM GPRS Module in Ghana? Whether for IoT projects, remote monitoring, or SMS-based automation, this compact and reliable GSM module is a must-have. Order today for fast delivery across Ghana!
Related products
16×2 LCD Display with I2C Interface – Yellow Backlight
A clear, beginner-friendly 16×2 character display with the I2C backpack already soldered. The yellow-green backlight provides excellent readability while the I2C interface reduces wiring to only four connections.
Display: 16 characters × 2 lines
Backlight: Yellow-Green
Interface: I2C (VCC, GND, SDA, SCL)
Voltage: 5V DC
Contrast: Adjustable
Installation: Ready to use – no backpack soldering required
Best For: Arduino, ESP32, Raspberry Pi, IoT and educational projects
BMP180 Digital Barometric Pressure & Altitude Sensor Module
Predict the weather or measure your altitude. The BMP180 is a high-precision sensor that measures air pressure and temperature. Because pressure changes with height, it also works as an incredibly accurate altimeter (±1 meter accuracy).
-
Measures: Pressure (Pa) & Temperature (C)
-
Interface: I2C (SDA/SCL)
-
Voltage: 3.3V to 5V Compatible
-
Best For: Weather stations, Drones, and GPS altitude correction.
DHT11 Temperature and Humidity Sensor Module | Digital Weather Station
The #1 sensor for weather projects. The DHT11 is the most affordable way to measure ambient temperature and humidity. It provides calibrated digital signal output, making it perfect for automatic fan controllers and weather stations.
-
Measures: Temperature (0-50°C) & Humidity (20-90%)
-
Interface: Single Wire Digital (Easy Arduino Connection)
-
Includes: 3-Pin Breakout Board + Jumper Wires (Check your stock to confirm wires!)
-
Ideal For: Smart homes, greenhouses, and environment monitoring.
Flame Sensor Module (YG1006) | Infrared Fire Detector for Arduino
Give your robot the ability to see fire. This sensor detects the specific infrared light wavelengths (760nm - 1100nm) emitted by flames. It is the essential "eye" for Fire Fighting Robots and home fire alarm projects.
-
Sensor Type: YG1006 NPN Phototransistor (High Speed).
-
Detection Range: Up to 1 meter (depending on flame size).
-
Spectrum: 760nm - 1100nm (Invisible IR light).
-
Best For: Fire Fighting Robots, Smart Kitchen Alarms, and Safety Systems.
HC-SR501 PIR Motion Sensor Module | Infrared Detector for Arduino
Build your own burglar alarm or automatic light. The HC-SR501 detects human and animal movement by sensing body heat. It is the standard motion sensor for Arduino security projects.
-
Range: Adjustable (3 to 7 meters)
-
Output: 3.3V Logic (High when motion detected)
-
Features: Adjustable Time Delay & Sensitivity
-
Ideal For: Automated lighting, security systems, and robotics.
IRF520 MOSFET Driver Module (0-24V) | PWM Motor & LED Controller
The easiest way to drive 12V/24V loads. This breakout board allows your Arduino to control high-voltage devices like LED strips, DC motors, and solenoid valves using the IRF520 MOSFET. It features screw terminals for easy wiring—no soldering required!
-
Max Load: 24V DC / < 5A.
-
Control Voltage: 3.3V or 5V (PWM Compatible).
-
Output: Pulse Width Modulation (Speed/Dimming control).
-
Best For: LED Strips, Small DC Fans, and Solenoids.
MQ-135 Air Quality & Hazardous Gas Sensor Module | CO2, Smoke, Ammonia
Detect smoke and dangerous gases instantly. The MQ-135 is the most versatile gas sensor for air quality monitoring. It detects a wide range of gases including Ammonia, Sulfide, Benzene, Smoke, and CO2. Perfect for "Smart Home" safety systems and environmental monitoring.
- Gases Detected: NH3, NOx, Alcohol, Benzene, Smoke, CO2.
-
Output: Analog (Gas Concentration) and Digital (Alarm Trigger).
-
Warm-up Time: ~20 seconds.
-
Best For: Air Quality Monitors, Smoke Alarms, and Industrial Safety.
Sound Sensor Module (Microphone) | Clap Switch & Alarm Detector
Turn on lights with a clap! This microphone module detects sound waves and converts them into a digital signal for your Arduino. It is the core component for "Clap Switch" projects and noise-activated alarms.
-
Sensitivity: Adjustable via Blue Potentiometer.
-
Outputs: Digital (Gate) and Analog (Waveform).
-
Microphone: High-Sensitivity Condenser Mic.
-
Best For: Clap Switches, Baby Monitors, and Noise Alarms.
Reviews
There are no reviews yet.